Installation Wizard
Anyplace Control
| Table Of Contents Previous Next |
|
|
| The most important steps of the installation process are highlighted below.
|
1. Select appropriate Module.
| During the installation process, you will be prompted to choose a Module to install. There are 2 options available.
|
|
|
| · | Install Admin Module on a PC that you are going to use to control other computers remotely.
|
| · | Install Host Module on a PC that you wish to control remotely.
|
|
|
| If you want to have a PC to remote from and to accept inbound remote connections, you should install both Modules.
|
|
|
| Note: All of the steps listed below are only applicable to the Host Module installation.
|
2. Choosing Host Module start type.
| The Host Module can be automatically started with Windows as a system service. Choosing this parameter will give you a great deal of automation, as you won't have to run a Host Module manually each time you start your PC. Otherwise, you may set a Host Module to be manually started by user through the Start menu.
|
|
|
3. Creating the Access Password.
| The Access Password protects access to your Host PC from unauthorized use . The password is a combination of data that you will need to connect to Host PC from a remote location.
|
| If you wish to grant to another person the access to your Host PC provide them with Access Password. Only individual(s) knowing the password will be able to connect to your Host PC remotely. Read more about security...
|
4. Connecting to the Online Account.
| The Online Account Connection service is the easiest way to connect to a remote PC over the Internet from any place without any network settings or IP address.
|
|
|
| After registering the Online Account, you will have to enter an Account Name (valid e-mail address) and Account Password.
|
|
|
| If you don't have an Online Account yet, press 'Create New Account' button.
|
|
|
| If you had created an Online Account earlier, enter your already existing Account data. However, beware of duplicate Accounts. All the PCs should be connected to one Account.
|
|
|
| If you don't wish to use the Online Account Connection service, press the 'Skip' button (not recommended).
|
5. Final dialog box.
| When the installation process is successfully finished, you will see a window containing your IP address, access to Online Account, etc.
|
|
|
| Remember or note the data shown in the final dialog box, as you will need this information to connect to the Host PC from a remote place.
|
