[an error occurred while processing this directive]
How it works and what you need to do?
Top  Previous  Next


 
You need to have 2 (or more) computers connected through the network or with access to the Internet and install the software on both. The software consists of two modules:

1.Admin Module (often called viewer or client) displays screens of the remote computers (in the separate windows) and allows the administrator to control the remote PCs with a mouse and a keyboard. This module is usually installed on administrator computers only.  

2.Host Module (often called server) executes the commands sent by Admin Module. This module is installed on each computer you want to control remotely (as a rule, each computer in the network).  
 
The installation package contains both modules. You can select a required module during the installation. You can install both modules on the same computer if you want.

Installation

1.Walk to computer you want to control remotely (Host PC). Download the installation package from our site onto that computer and install the Host Module there *.  
2.Go to your own PC (Admin PC). Download the installation package and install the Admin Module.  

* Note: if Host PC is located in the same network as Admin PC, you are not obliged to visit it individually to install Host Module: you can install it remotely by using "Remote Installation" feature. This feature is integrated with Admin Module and you can call it via "Tools" menu.

Warning: If during installation your Antivirus software inform you that apc_host.exe is trojan, please ignore this message. Installation package can't contain a virus if you downloaded it from our web site http://www.anyplace-control.com. It is misoperation of Antivirus.


How to control the remote computer?

1.Start the Administrator Module application via desktop shortcut. Admin Module's Control Window will appear.  
2.Click on the "ADD NEW PC" address book item for adding a new computer address to the Address Book. Enter the remote IP address (or computer name), port number and other information about remote PC in appeared dialog box.  
3.Click the "Connect" button in toolbar, enter the Access Password of the remote computer (if it is requested) in the Connection dialog box.  
4.Click on the "Full Control" button in toolbar.  
5.Control the remote PC by your keyboard and mouse in the appeared Remote Screen window.  

That is all.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

[an error occurred while processing this directive]