ANYPLACE CONTROL

When the Host Computer is OFF, is is possible to connect to it by powering it on first?
I just downloaded the trial version, and was able to log off / power down, but now when I want to reconnect to the host computer over the internet. the power options are not available.

You can turn on the remote Host from Admin PC only if the following 3
conditions are true:

1) both Admin and Host PCs are located in the same LAN (not Internet);

2) you have already accessed this Host from this Admin before;

3) Wake On LAN feature is turned in the BIOS settings

II))If they are, please, start Admin module->Select Direct Connections
tab->Select the necessary Host PC entry->Click the "Power" button on
the Admin module toolbar->Select Power On feature.

Hope being helpful.